Non-Conductive Thermoplastic Hoses – 518C/518D
$11.05 – $30.73
Parker’s Non-Conductive Hoses 518C/518D have a high density braid to handle maximum impulse life. The 518D has a nylon core material that allows for improved chemical compatibility.
Part Number: 518C/518D
Technical Specifications
| Hose Inside Diameter: | 3, 5, 6, 8, 10, 13, 19, 25 mm, 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 3/4, 1 inch |
| Hose I.D. (size): | -2, -3, -4, -5, -6, -8, -12, -16 |
| Hose Outside Diameter: | 0.34 – 1.32 inch, 9 – 34 mm |
| Maximum Operating Pressure: | 69 – 224 bar, 1,000 – 3,250 psi, 6.9 – 22.4 MPa |
| Vacuum Pressure Rating: | 711.2 mm-Hg, 28 Inch-Hg |
| Weight: | 0.05 – 0.40 kg/m, 0.03 – 0.27 lb/ft |
| Compatible Fitting: | 51 or 56 Series – dependent on style |
| Minimum Operating Temperature: | -40 °F, -40 °C |
| Maximum Operating Temperature: | 212 °F, 100 °C |
| Minimum Bend Radius: | 1/2 – 8 inch, 13 – 203 mm |
| Specifications Met: | SAE J517 for less than 50 micro-amps leakage under 75,000 volts per foot, SAE 100R7, ANSI 92.2 |
| Media: | Hydraulic Fluids, Lubricants |
| Application: | Fluid Handling, Hydraulic, Manufacturing / Industrial, Construction, Agriculture / Forestry |
| Hose Type: | Non Conductive |
| Color: | Orange |
Full Product Description
Parker’s Non-Conductive Thermoplastic Hoses – 518C/518D features an improved force to flex and has a high density braid to handle maximum impulse life without the loss of flexibility. The lay lines on these hoses have both ANSI and SAE maximum working pressure listed. They are the optimal solution for medium pressure hydraulic service where hydraulic circuit exposure and contact with high voltage may be encountered. Both are available in twin-line and multi-line constructions.
Markets
- Machine Tool
- Industrial
- Mobile Equipment
- Transportation
- Material Handling
Features/Benefits
- Twin or multi-line constructions available
- High density braid for maximum impulse life without loss of flexibility
- 518C available with field attachable and permanent crimp fittings
- 518D has a nylon core material that allows for greater chemical compatibility
Applications:
- Medium pressure hydraulic service where hydraulic circuit exposure and contact with high voltage may be encountered
- Turf equipment and grounds maintenance
- Utility trucks
- Aerial lLift
Certifications/Compliance:
- Meets SAE J517 for less than 50 micro-amps leakage under 75,000 volts per ft.
- Meets/Exceeds SAE 100R7 specifications and Electrical Standards except 518C-2 with respect to maximum working pressure
- ANSI A92.2
Technical Specifications:
- 518C Tube: Copolyester
- 518D Tube: Nylon
- Reinforcement: Fiber
- Cover: Polyurethane, non-perforated
- Lay lines on hoses will have both ANSI and SAE maximum pressure listed; ANSI A92.2 “Vehicle Mounted Elevating and Rotating Aerial Devices”
- Maximum Working Pressure rated per ANSI A92.2; for SAE 100R7 rating, view Parflex Catalog 4660
- 518C Limited to +135F for synthetic hydraulic fluids and water-based fluids
- +/- 2% Change in length at maximum working pressure
- Hose I.D. is nominal
- Hose O.D. is maximum
Note:
- Only the SAE pressures are listed in the table. Review CAT 4660 to view ANSI and SAE pressures.
Related Documents
| Distributor Support |
|---|
Parker 51R Assembly – How To Video–51R Assembly Video |
| Product Demos & Tutorials |
|---|
Parflex Rapid Assembly Fittings–Rapid Assembly Video |
Parker 51R Assembly – How To Video–51R Assembly Video |
Parker MiniKrimp Instructional Video |
| Selector Guides |
|---|
Crimpsource Online |
Wind Energy Solutions US – Industrial Turbine Renewable Energy Products and Equipment |