High Pressure Parkrimp Hoses 701 – 701TC | #701-8


Parker’s No-Skive High Pressure hoses 701 and 701TC are designed for a working pressure up to 45,0 MPa and a temperature range from -40 °C up to +100 °C. The hose range is compatible with No-Skive fittings in steel and stainless steel.

Part Number:701-8

Description: USE 797TC-8

Technical Specifications
Hose Cover Type: Standard
Hose Inside Diameter: -8
Nominal Hose Inside Diameter: 12
Hose Inside Diameter: 1/2 inch, 12.7 mm
Hose Outside Diameter: 24.6 mm
Compatible Fitting: Parkrimp 70 Series Fittings
Maximum Operating Temperature: 100 °C, 70 °C, 85 °C
Minimum Operating Temperature: -40 °C
Maximum Operating Pressure: 41.5 MPa, 6000 psi
Burst Pressure: 166 MPa, 24000 psi
Minimum Bend Radius: 230 mm
Industry Application: Synthetic rubber
Cover Material: Synthetic rubber
Hose Reinforcement Material & Structure: Four spirals high-tensile steel wire
Media: Petroleum and water-glycol based fluids, lubricating oils, air and water.
Application: General high pressure hydraulic applications
Specifications Met: ISO 3862 Type 4SP – EN 856 Type 4SP
Item Information

Parker’s High Pressure No-Skive hoses 701 and 701TC are the preferred hoses for general high pressure hydraulic applications. The hoses are designed with a No-Skive construction and are suitable for a working pressure up to 45,0 MPa. Based on the advanced materials the hose type 701TC is highly abrasion resistant. The Parker High Pressure hose range is complemented by a full selection of compatible No-Skive fittings in steel and stainless steel.


  • Construction Equipment
  • Injection Moulding
  • Forestry and Agriculture
  • Materials Handling
  • Pulp and Paper


  • Reinforcement of four spirals high-tensile steel wire – according to ISO 3862 – EN 856 Type 4SP.
  • Matched hose and fitting system guarantees an approved and safe combination and the highest quality and safety, combined with the longest service life of the final product to the end-users.
  • The hose type 701TC has a tough cover (TC) and is therefore ideal for applications where high abrasion resistance is required. Tough cover 80 x greater abrasion resistance than standard rubber cover hoses.
  • 701TC is also MSHA approved and suitable for temporary immersion in mineral oil up to 70 °C with frequent inspections.
  • Complete No-Skive fitting technology across the full range of medium pressure hoses providing simpler, quicker and safer hose assembly.


  • General high pressure hydraulic applications

Parker’s High Pressures Hoses 701 and 701TC are compatible with the Parker Parkrimp medium pressure fitting series 70.

Related Documents

54 in stock